Seiki TV keeps turning off — Try this

If your Seiki TV keeps turning off within seconds or minutes, you might want to know what causes the TV to turn off automatically and possibly fix the problem.

If that is you, then this post is for you.

After reading through this post, you will know why your Seiki TV keeps turning off and possible diagnostics and fixes.

To have this problem well-targeted and fixed, you have to be sure of the model of Seiki TV that you are using.

This is to help you get the right solution professed to you.

Why Seiki TV keeps turning off

Seiki TV turning off means that you are having an internal hardware problem, such as a defective power supply or main/control board, however, there are several possible failure locations.

This problem could be caused by a manufacturing error, but it’s more likely to be caused by a power event (shock/surge, prolonged over/under voltage, etc.).

This could possibly be due to age-related wear and tear; as a 2014 model television, this type of failure is very common.

Seiki and the likes are some of the cheapest TV sets available.

They’re made to meet a specific budget, not for quality or durability.

It’s quite expected and anticipated for them to just survive a year or two at most.

Try this if your Seiki TV keeps turning off

— Unplug the power cable from the socket-outlet

— Hold on for at least 60 mins. (1 hour)

— Hold down the power button on the TV for at least 1 minute (Not the power button on the remote, please take note)

— While plugging back in, keep holding the power button for another 60 seconds.

When re-plugging, bypass any power strips or surge protectors and connect straight to the wall outlet.

If the reset doesn’t work, it’s likely that there’s a problem with the internal hardware.

This is something that would involve repairs; if you’re thinking about doing it yourself, you’ll need to be familiar and skilled with electronics repairs, which could include dismantling the set (taking off the back panel of the television), replacing boards as needed, diagnostics testing with a multimeter, and possibly desoldering/removing and soldering/replacing faulty components.

If you go to a local shop for repair, expect to pay about $300 for diagnostics, parts, and labor, with no guaranteed increase in the life of the television.

You might get a few more months out of it, but other pieces will continue to fail, necessitating increased maintenance. It’s unlikely to survive more than a year.

Replacement makes more sense for a television of this brand and age.

With about 200 bucks, you can acquire a brand new LED television with a new guarantee from a more renowned brand.